Product appearance varies with coupling size and finished bore. Use the model table below for dimensions and send both shaft details for machining.
NM67 Flexible Coupling
NM67 provides 13 N.m nominal torque, up to 28 mm bore capacity and a rated speed limit of 3000 rpm. It is suited to compact pumps, fans and light machinery when torque, shaft fit, alignment and installation space are all within the model limits.
NM67 technical data
NM67 steps up bore capacity to 28 mm while keeping a relatively short 30 mm axial length. It is a useful candidate when a compact machine has outgrown NM50 on shaft size but does not need the larger envelope of the mid-range couplings.
| ماڈل | برائے نام ٹارک | رفتار کی حد | ڈی | D1 | ڈی زیادہ سے زیادہ | ایل | ایس | ریڈیل | کونیی |
|---|---|---|---|---|---|---|---|---|---|
| NM67 | 13 این ایم | 3000 آر پی ایم | 67 ملی میٹر | 46 ملی میٹر | 28 ملی میٹر | 30 ملی میٹر | 2.5 +/- 0.5 ملی میٹر | 0.03 ملی میٹر | 3.0 ڈگری |
ڈی، ڈی 1، ڈی میکس، ایل، ایس اور ریڈیل ویلیوز ملی میٹر میں ہیں۔ کونیی نقل مکانی ڈگری میں دکھائی گئی ہے۔ چھوٹی اسکرینوں پر، تمام کالم دیکھنے کے لیے میز کو افقی طور پر گھسیٹیں۔
Fit and machining checks
The 67 mm outside diameter and 46 mm D1 dimension should be checked against covers, brackets and pump guards. On replacement work, do not assume that an old 25 or 28 mm shaft automatically means NM67; verify the installed envelope and keyway as well.
Where this size fits
With 13 N.m nominal torque and a 3000 rpm speed limit, NM67 can be screened for small pump, fan and general machine drives. The final choice still depends on starting behavior and the driven equipment, not the motor frame alone.
Alignment and assembly
NM67 uses a 2.5 +/- 0.5 mm separation. Its stated radial allowance is 0.03 mm and angular allowance is 3.0 degrees. Keep those values as commissioning boundaries after final base and piping adjustments.
Prepare the NM67 RFQ
Quote requests should identify the motor-side bore, driven-side bore and their keyways separately. Add actual running rpm and the duty description so the 13 N.m rating is evaluated in the right context.
Material and service conditions
Specify the elastomer by material requirement rather than colour. NBR is standard for this range; unusual temperature or fluid exposure should be stated before the replacement element is confirmed.
Compare the nearest NM sizes
When NM67 is close to its torque or bore ceiling, compare NM82. If the duty is much lighter and both shafts fit below 19 mm, NM50 may offer a smaller envelope.
