Rupa produk berbeza mengikut saiz gandingan dan lubang siap. Gunakan jadual model di bawah untuk dimensi dan hantarkan butiran kedua-dua aci untuk pemesinan.
Gandingan Fleksibel NM112
NM112 provides 70 N.m nominal torque, up to 48 mm bore capacity and a rated speed limit of 3000 rpm. It is suited to mid-range pumps, blowers, mixers and machinery when torque, shaft fit, alignment and installation space are all within the model limits.
NM112 technical data
NM112 opens the mid-range group with 70 N.m nominal torque and a 48 mm maximum bore. It is often evaluated when a drive has a noticeably larger shaft interface but still operates within a 3000 rpm limit.
| Model | Tork nominal | Had laju | D | D1 | d maks | L | S | Jejarian | Sudut |
|---|---|---|---|---|---|---|---|---|---|
| NM112 | 70 Nm | 3000 putaran | 112 mm | 79 mm | 48 mm | 60 mm | 3.5 +/- 1.0 mm | 0.07 mm | 2.5 darjah |
Nilai D, D1, d maks, L, S dan jejari adalah dalam milimeter. Anjakan sudut ditunjukkan dalam darjah. Pada skrin yang lebih kecil, seret jadual secara mendatar untuk melihat semua lajur.
Pemeriksaan padanan dan pemesinan
At 112 mm outside diameter and 60 mm length, installation space becomes more visible in the selection. Check guard diameter, shaft projection and access for the flexible element before fixing the bore dimensions on the drawing.
Di mana saiz ini sesuai
Pumps, mixers, conveyors and general machinery can bring different starting behavior to the same nominal power. For NM112, state whether the drive starts loaded, cycles frequently or sees process shock so the application can be reviewed beyond its 70 N.m continuous rating.
Penjajaran dan pemasangan
NM112 uses S 3.5 +/- 1.0 mm, with 0.07 mm radial and 2.5 degree angular limits. Measure alignment after final machine tightening because base distortion or connected piping can move the shafts from an earlier workshop setting.
Prepare the NM112 RFQ
Send both shaft diameters, keyways, speed and duty, plus quantity and destination. If either bore approaches 48 mm, include the keyway and fit requirement so the machining request can be checked with the available hub section.
Syarat bahan dan perkhidmatan
The standard flexible element is NBR. For elevated temperature, chemical exposure or a nonstandard hardness request, give the service conditions with the NM112 enquiry so the quoted element can be specified clearly.
Bandingkan saiz NM yang terdekat
If NM112 is too small on bore or torque, compare NM128. If its 112 mm diameter creates a packaging problem and the load permits, NM97 is the nearest smaller alternative to review.
