Rupa produk berbeza mengikut saiz gandingan dan lubang siap. Gunakan jadual model di bawah untuk dimensi dan hantarkan butiran kedua-dua aci untuk pemesinan.
Gandingan Fleksibel NM82
NM82 provides 28 N.m nominal torque, up to 32 mm bore capacity and a rated speed limit of 3000 rpm. It is suited to compact pumps, fans and light machinery when torque, shaft fit, alignment and installation space are all within the model limits.
NM82 technical data
NM82 sits between the compact NM67 and the larger-bore NM97. Its 32 mm maximum bore makes it relevant to many small and medium rotating-equipment interfaces where shaft fit becomes the first sizing filter.
| Model | Tork nominal | Had laju | D | D1 | d maks | L | S | Jejarian | Sudut |
|---|---|---|---|---|---|---|---|---|---|
| NM82 | 28 Nm | 3000 putaran | 82 mm | 53 mm | 32 mm | 40 mm | 3.0 +/- 1.0 mm | 0.05 mm | 3.0 darjah |
Nilai D, D1, d maks, L, S dan jejari adalah dalam milimeter. Anjakan sudut ditunjukkan dalam darjah. Pada skrin yang lebih kecil, seret jadual secara mendatar untuk melihat semua lajur.
Pemeriksaan padanan dan pemesinan
Check the 82 mm outside diameter, 53 mm D1 and 40 mm length against the actual machine space. A coupling can satisfy torque and still be awkward to install if the guard opening or shaft projection is limited.
Di mana saiz ini sesuai
The nominal rating is 28 N.m with a 3000 rpm speed limit. NM82 can be evaluated for pump sets, blowers and machinery with moderate continuous duty, but loaded starts and repeated cycling should be stated rather than hidden inside a generic motor-power figure.
Penjajaran dan pemasangan
Use the 3.0 +/- 1.0 mm S value when positioning the hubs. The stated radial limit is 0.05 mm and the angular limit is 3.0 degrees; verify them after the machines are fully assembled and tightened.
Prepare the NM82 RFQ
An efficient NM82 RFQ includes both bore/keyway requirements, running speed, design torque or motor power, the driven machine and quantity. For a retrofit, add the old coupling envelope so installation space can be compared before machining.
Syarat bahan dan perkhidmatan
The standard NBR element provides the flexible connection for this range. If service includes oil, heat, chemicals or unusual cycling, describe that environment and request the required polymer or hardness explicitly.
Bandingkan saiz NM yang terdekat
If a shaft exceeds 32 mm or the torque margin is too small, move the comparison to NM97. Where packaging is very tight, also check whether NM67 can satisfy both bore and duty.
