Send the shaft dimensions, keyways and drawing requirements in the format used by your project. We support metric and inch shaft data, OEM and replacement work, mixed-model enquiries and export documentation for international orders.
Німеччина
Metric shaft data, pump and machinery RFQs, and drawing-controlled bore requirements.
RFQ guidance →Індія
Pump, compressor, OEM and distribution enquiries with mixed-model and replacement requirements.
RFQ guidance →Італія
Machinery, packaging, pump and process-equipment projects with custom shaft interfaces.
RFQ guidance →Сполучені Штати
Metric or inch shaft data for pump, compressor, machine-builder and MRO requirements.
RFQ guidance →Японія
Drawing-led pump, automation and machinery requirements with careful interface control.
RFQ guidance →The coupling rating follows the NM size; the RFQ details follow the project.
Use the same NM torque, speed and dimensional data wherever the equipment is installed, then add the local drawing units, documentation and delivery requirements to the enquiry.
| Model | Nominal torque | Speed limit | D | D1 | d max | L | S | Radial | Angular |
|---|---|---|---|---|---|---|---|---|---|
| НМ50 | 5 N.m | 3000 об/хв | 50 mm | 33 mm | 19 mm | 25 mm | 2 +/- 0.5 mm | 0.03 mm | 3.0 deg |
| NM67 | 13 N.m | 3000 об/хв | 67 mm | 46 mm | 28 mm | 30 mm | 2.5 +/- 0.5 mm | 0.03 mm | 3.0 deg |
| НМ82 | 28 N.m | 3000 об/хв | 82 mm | 53 mm | 32 mm | 40 mm | 3.0 +/- 1.0 mm | 0.05 mm | 3.0 deg |
| NM97 | 45 N.m | 3000 об/хв | 97 mm | 69 mm | 42 mm | 50 mm | 3.0 +/- 1.0 mm | 0.05 mm | 2.5 deg |
| NM112 | 70 N.m | 3000 об/хв | 112 mm | 79 mm | 48 mm | 60 mm | 3.5 +/- 1.0 mm | 0.07 mm | 2.5 deg |
| НМ128 | 140 N.m | 3000 об/хв | 128 mm | 90 mm | 55 mm | 70 mm | 3.5 +/- 1.0 mm | 0.07 mm | 2.5 deg |
| NM148 | 280 N.m | 3000 об/хв | 148 mm | 107 mm | 65 mm | 80 mm | 3.5 +/- 1.0 mm | 0.07 mm | 2.0 deg |
| НМ168 | 500 N.m | 3000 об/хв | 168 mm | 124 mm | 75 mm | 90 mm | 3.5 +/- 1.5 mm | 0.10 mm | 2.0 deg |
| NM194 | 840 N.m | 1500 об/хв | 194 mm | 140 mm | 85 mm | 100 mm | 3.5 +/- 1.5 mm | 0.10 mm | 2.0 deg |
| NM214 | 1000 N.m | 1500 об/хв | 214 mm | 157 mm | 95 mm | 110 mm | 4.0 +/- 2.0 mm | 0.10 mm | 2.0 deg |
D, D1, d max, L, S and radial values are in millimetres. Angular displacement is shown in degrees. On smaller screens, drag the table horizontally to view all columns.
